Call Us : +919555353786

Horizontal Rectangular Autoclave

10000.00 - 70000.00 INR/Piece

Get a Price/Quote

Ask A Question Send Inquiry

Price And Quantity

Constructional and Salient Features:

Inner Chamber is made up of thick non-magnetic steel of 304/316 quality and jacket is made out of rolled steel.
Single door made of rolled steel lined with S.S. sheets has radial locking system.
All units are hydraulically tested upto 40psi.
The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses.
Boiler is made of thick stainless steel sheet and is located under the sterilizer.
Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.
Unit is also fitted with low-water level cut-off device and automatic pressure control device.
All rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.
The door cannot be opened when chamber is under pressure.
Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired.
Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/cleaning.
Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.
Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.
To work on 440 volts, 3 Phase, A.C. Supply.

Technical Specifications & Ordering Informations,

MODEL	#SAI-180	#SAI-240		#SAI-320	#SAI-430
Inner Dimensions (WXHXD) (mm)	450X450X900	450X600X900		600X600X900	600X600X1200
Capacity	180 ltrs	240 ltrs		320 ltrs	430 ltrs
Heater load	6.0 KW	9.0 KW		9.0 KW	9.0 KW
Controller			Automatic Piezostat (Pressure Control Switch)
Display			Dial Thermometer
Exhaust of Pressure			Manual through a Multiport valve
Sterilizing Pressure			1.2 to 1.5 kgf /cm² (15 to 20 psi) at 121ºC
Operating Pressure			From 15 to 20 psi
Pressure Gauge			0-2.1 kgf /cm² (30 psi)
MOC (Pressure Vessel)			Stainless Steel (SS-304 or SS-316 as Ordered)
MOC (Jacket)			Made of COLD ROLLED STEEL
MOC (Boiler)			Stainless Steel
MOC (External Wall)			Mild Steel Sheet Duly Painted
MOC (Lid)			Mild Sheet Duly Painted lined with S.S. from inside
POWER SUPPLY			440V AC, 3 Phase Supply
S.S. Carriage (OPTION)			Option available at extra cost
M.S. Trolley (OPTION)			Option available at extra cost